Axiris Audio Visualizer Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lampu depan Axiris Audio Visualizer. Axiris Audio Visualizer 6 halaman.

Halaman Cetak

Configuration Menu

Cfg. Menu
Cfg. Menu
◄► Calibration
◄► Burn in
Cfg. Menu
◄► Main
1
Select the previous menu.
Cfg. Menu
◄► Calibration
2
Select the next menu.
1
2
3
3
Enter the selected menu.
8
Cfg. Menu
Cfg. Menu
◄► Settings
◄► Information
User Manual

Audio Menu

Audio
Audio
IV-26 IN-13
►
SOLID
This menu enables audio visualization on the display modules. The system samples the
stereo audio input signal and visualizes the frequency bands on the connected displays.
The display connected to the left port visualizes the left audio channel, the display
connected to the right port visualizes the right audio channel. The audio input signal
comes from the audio input or the built-in microphone.
1
Reinitialize the left display.
Audio
IV-26 IN-13
►
2
Reinitialize the right display.
1
2
3
3
Go to the next screen.
This is the entry screen of the audio menu. It shows which display modules are
connected. You can reinitialize a display module by pressing the corresponding button.
Cycle through the group of RGB animation types:
1
Audio
SOLID
24
►
2
Select the next RGB animation.
1
2
3
3
Go to the next screen.
Here you can change the RGB animation on the display modules.
The spectrum animation is exclusively available in the audio menu. It animates the RGB
LEDs based on the sampled audio signal.
1
Exit to the main menu.
Audio
EXIT
SLEEP
►
2
Put the system in sleep mode. Press any button to wake up.
1
2
3
3
Go to the first screen.
Here you can exit to the main menu, put the system to sleep or go back to the entry
screen.
User Manual
Audio
24
►
EXIT
SLEEP
►
WAVE ► SOLID ► SPECTRUM
5