Axiris Audio Visualizer Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lampu depan Axiris Audio Visualizer. Axiris Audio Visualizer 6 halaman.

Halaman Cetak
Animation Menu
Animation
Animation
IV-26 IN-13
►
WAVE
When this menu is active, the system shows animations on the connected display
modules. You can change both tube animations and RGB animations.
1
Select the next animation on the left display.
Animation
IV-26 IN-13
►
2
Select the next animation on the right display.
1
2
3
3
Go to the next screen.
The entry screen of the animation menu shows which displays are connected. You can
advance to the next animation by presses the display's corresponding button.
Cycle through the group of RGB animation types:
1
Animation
WAVE
5
►
2
Select the next RGB animation.
1
2
3
3
Go to the next screen.
Here you can change the RGB animation on the display modules.
1
Exit to the main menu.
Animation
EXIT
SLEEP
►
2
Put the system in sleep mode. Press any button to wake up.
1
2
3
3
Go to the first screen.
Here you can exit to the main menu, put the system to sleep or go back to the entry
screen.
6
Animation
5
►
EXIT
SLEEP
►
WAVE ► SOLID
User Manual
Demo Menu
Demo Mode
Choose Program
EXIT
►
◄►
1
The demo menu allows you to run a demonstration program. Such program takes over
control of the buttons and uses the system as if it were a real-life user. A demonstration
program may run definitely and indefinitely.
1
Exit to the main menu.
Demo Mode
EXIT
►
2
No function.
1
2
3
3
Go to the next screen.
Entry screen.
1
Select the previous demo program.
Choose Program
◄►
1
►
2
Select the next demo program.
1
2
3
3
Go to the next screen.
Choose one of the available demonstration programs:
1. Animations Showcase: The program shows tube and RGB animations indefinitely. You
can run this program to show the system unattended in a store or public place.
2. Menu Presentation: The program walks through the various menu screens and allows
one to explore or present to an audience the available features and settings. This
program runs definitely and ends up in the entry screen of the demo menu.
1
Select YES or NO.
Can Stop?
◄► YES
►
2
Select YES or NO.
1
2
3
3
Go to the next screen.
Decide whether one may or may not interrupt a running demonstration program. If set to
YES, one can stop the demonstration program by pressing any of the buttons. If NO is
selected, the only way to stop the demonstration program is to power-cycle or reset the
system.
1
Start running the selected demo program.
Run Demo Program
START
►
2
No function.
1
2
3
3
Go to the first screen.
Here you can start the selected demonstration program.
User Manual
Can Stop?
Run Demo Program
►
◄► YES
►
START
►
7