BIOMICROBICS BioBarrier 1.0 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Air BIOMICROBICS BioBarrier 1.0. BIOMICROBICS BioBarrier 1.0 13 halaman. For use with nsf/ansi std. 40 class i/std. 350 class r, ansi/nsf std. 245
Juga untuk BIOMICROBICS BioBarrier 1.0: Panduan Pemilik (7 halaman)

Halaman Cetak
INSTALLATION MANUAL
FOR USE WITH
ANSI/NSF Std. 40 Class I / Std. 350 Class R
ANSI/NSF Std. 245

GENERAL INFORMATION

The BioBarrier® 0.5, 0.5-N, 1.0, 1.0-N, 1.5 & 1.5-N membrane bioreactor wastewater treatment systems are certified by the NSF
International/ American National Standards Institute Organizations to meet NSF/ANSI Standard 40, Class 1 certification for single
residence wastewater treatment devices, NSF/ANSI Standard 245 for nitrogen reduction, and NSF/ANSI Standard 350 Class R
for restricted indoor and unrestricted outdoor use, such as toilet, urinal flushing and surface and subsurface irrigation. All
BioBarrier® products are ETL certified for safety (electrical, environmental, etc.). If you have questions regarding any Bio-Microbics
products please contact us at:
1-800-753- 3278 or +1(913) 422-0707

DELIVERY INSPECTION

The BioBarrier® system has been carefully manufactured, checked and tested at the factory before shipment. Before and after
uncrating the unit, check the packaging for signs of shipping damage. If there is evidence of damage or abuse, notify Bio-Microbics,
Inc. at (800) 753-3278 or (913)422-0707.
THE BIOBARRIER
The BioBarrier® System, is a membrane bioreactor providing primary settling, fecal coliform, BOD, TSS and nitrogen reduction (if
needed) using aeration and anoxic zones, and membrane filtration. The system is contained in locally supplied tanks, either in a
two or three compartment tank, or multiple tanks, with the membrane module always in the last compartment/ tank of the
system. The membrane module itself consists of flat sheet membranes arranged in a cartridge. A high mixed liquor suspended
solids concentration in the aeration zone provides biological treatment and nitrification. The final effluent or permeate is pulled out
by the permeate pump through the MBR membranes leaving behind large organic and inorganic particles for further digestion or
wasting.
If nitrogen removal is not needed the system (BioBarrier® 0.5, 1.0, and 1.5) consists of a tank with two compartments or two
separate tanks. The first compartment or tank provides primary treatment - sedimentation and separation of floatables and
solids, and is equipped with an outlet screening device called SaniTEE
wastewater will flow into the second compartment or tank, which is the aeration/membrane zone.
A. Influent
B. SaniTEE
®
C. Blower & Housing
D. Control Panel
E. Vent
F. Optional baffel wall
G. BioBarrier Reactor
H. Optional Mixing
blower
®
BioBarrier
0.5, 1.0, and 1.5
®
BioBarrier
0.5-N, 1.0-N, and 1.5-N
®
SYSTEM
. From this screened compartment or tank, the
®