HTC 400 DS Panduan Pengguna - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Lantai HTC 400 DS. HTC 400 DS 38 halaman.

Halaman Cetak
Operation
Figure 4-4 Removing grinding tools
2.
3.

4.5. Preparations for dry grinding

Warning!
Check that the splash guard is fitted.
1.
Note!
The dust extractors suction hose must be connected to the
appropriate socket on the machine. Adjust thedust extractor to
match the grinder's capacity.
18
Slide the grinding tool diagonally from above down into
the appropriate guide slot on the tool holder - see Figure
4-2 on page 17. Then push the tool fully into the guide
slot.
Lock the grinding tool into the tool holder by giving
it a few light taps with a rubber hammer - see Figure
4-3 on page 17.
Connect a dust extractor to the machine. For dust extractor
models, see under the Suction System tab in the HTC
Product Catalogue.
HTC 400 DS
2.0