HTC 400 DS 사용자 설명서 - 페이지 26
{카테고리_이름} HTC 400 DS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC 400 DS 38 페이지.
페이지 인쇄Operation
Figure 4-4 Removing grinding tools
2.
3.
4.5. Preparations for dry grinding
Warning!
Check that the splash guard is fitted.
1.
Note!
The dust extractors suction hose must be connected to the
appropriate socket on the machine. Adjust thedust extractor to
match the grinder's capacity.
18
Slide the grinding tool diagonally from above down into
the appropriate guide slot on the tool holder - see Figure
4-2 on page 17. Then push the tool fully into the guide
slot.
Lock the grinding tool into the tool holder by giving
it a few light taps with a rubber hammer - see Figure
4-3 on page 17.
Connect a dust extractor to the machine. For dust extractor
models, see under the Suction System tab in the HTC
Product Catalogue.
HTC 400 DS
2.0