Bionaire BCH9208 Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas Listrik Bionaire BCH9208. Bionaire BCH9208 10 halaman. Bionaire electric heater user manual
Juga untuk Bionaire BCH9208: Selebaran Instruksi (2 halaman), Selebaran Instruksi (2 halaman)
Halaman Cetak
Trouble
• Not Enough
☛ Heater is in Low Heat setting.
Heat.
☛ Thermostat set too low.
• Heater cycles
☛ The thermostat automatically turns
ON and OFF
frequently.
☛ Every 10 minutes the heater turns
• Remote Does
☛ Battery low.
not work.
☛ Distance too far.
☛ Control Panel Display dirty.
• Heater is
☛ When the heater is in Thermostat
Blowing Cold
Air.
☛ Unit is in the Fan Only setting.
☛ Mode Button ( /Mode) may have
• Fan Speed
☛ High Heat and Low Heat/Eco-Smart
Doesn't
Change.
• Unexpected
☛ You may hear a popping or
Noise.
☛ There may be an odor or vapor
• Unexpected
Smell.
T R O u b L e S H O O T I N g
Troubleshooting for your Heater
Probable Cause
the heater on and off to maintain
selected comfort level.
on and runs for 3 minutes.
Mode and reaches the set
temperature it will automatically
perform a 10 second cool down
(blowing cold air) to ensure
thermostat accuracy.
been pressed to turn off the heater.
settings control the heat output of
the heater and not the fan speed.
Fan runs at the same speed on all
settings.
crackling sound as the heater heats
up. This is normal and safe
operation. Once the heater heats up,
the crackling sound will go away.
coming from the heater the first
time you use it or after prolonged
or seasonal storage.
✔ Change setting to High Heat.
✔ Press the Up (
temperature setting.
✔ To make this occur less frequently press the Up
(
) Button to the highest setting.
✔ This is normal operation to ensure the heater is
maintaining the room temp accurately. Such
kind of cycling will repeat for 3 times only for
every power on.
✔ Change battery (Disc type, 3 volt, CR2025).
✔ Remote works up to 20 feet.
✔ Be sure to point remote at control panel on
heater and there are no obstructions.
✔ Make sure display panel is clean.
✔ Raise the temperature higher or change setting
to Low or High heat.
✔ Press the Mode Button ( /Mode) to select
High Heat or Low Heat settings.
✔ Press the Mode Button ( /Mode) to turn on
the heater.
✔ Run heater in High Heat for maximum heat
TM
output.
✔ If the noise persists call Bionaire at
1-800-253-2764.
✔ This is normal and is the result of dust or other
debris accumulating on the heating element.
Make sure the heater is in a well ventilated
area and continue running until the odor or
vapor goes away.
Solution
) Button to the highest