Alpha Group Out Back Power MATE Series Ikhtisar - Halaman 8

Jelajahi secara online atau unduh pdf Ikhtisar untuk Unit Kontrol Alpha Group Out Back Power MATE Series. Alpha Group Out Back Power MATE Series 14 halaman. System display and controller

Halaman Cetak
Alpha Group Out Back Power MATE Series Ikhtisar
Setting up the basic Inverter
functions includes:
1. Selecting the AC input (Grid or Gen).
2. Setting the Search function.
Main Screen
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
SETUP------------------
choose device:
FX
MATE
SETUP/FX----------------
choose category
SRCH INPUT
SETUP/FX/SEARCH------P01
SETUP/FX/INPUT-------P01
search
6
ac transfer
sensitivity
control
DOWN INC
DEC
PORT
DOWN GRID
SETUP/FX/SEARCH------P01
SETUP/FX/INPUT
search
8 cycles
Ac1/grid
pulse length
limit
DOWN INC
DEC
PORT
DOWN
INC
DEC
SETUP/FX/SEARCH------P01
SETUP/FX/INPUT
search
60 cycles
Ac2/gen
limit
pulse spacing
DOWN INC
DEC
PORT
SETUP/FX/SEARCH---------
SETUP/FX/INPUT---------
search setup completed
Input setup completed
TOP SETUP MAIN
900-0131-01-00 Rev A.vsd\INV Setup\2012-03-21
©2012 OutBack Power Technologies. All Rights Reserved.
Changing more detailed operating parameters
requires access to the Advanced Setup Menu.
Accessing the Advanced Menu:
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV/PASSOWRD------------
Enter the password
132
ENTER INC
DEC
A
1. Press the <INC> soft key
A
until "141" is displayed on
the LCD.
1
GEN
PORT
2. Press the <ENTER> soft key
B
to accept the password and
move forward to the Device
Selection Menu.
1
ADV/PASSOWRD------------
60.0 aac
Setpoints:
Enter the password
Grid
141
PORT
Generator
ENTER INC
DEC
B
ADV--------------------
30.0 aac
choose device
DOWN
INC
DEC
PORT
FX
CC
DC
To return to the Main
TOP SETUP
MAIN
screen at any time:
MAIN-------------------
3:02:14P
SUM STATUS SETUP ADV
Press and hold the 2 left soft
keys at the same time. Release
when the Main screen appears.
ADV/FX/INVERTER-----P01
search
6
sensitivity
DOWN
INC
DEC PORT
ADV/FX/INVERTER-----P01
search
8
pulse length
DOWN
INC
DEC PORT
EXIT
ADV/FX/INVERTER-----P01
search
8 cycles
pulse length
DOWN
INC
DEC
PORT
ADV/FX/INVERTER------P01
search
60 cycles
pulse spacing
DOWN
INC
DEC
PORT
ADV/FX/INVERTER------P01
low battery
21.0 Vdc
cutout set point
DOWN
INC
DEC
PORT
EXIT
ADV/FX/INVERTER------P01
low battery
25.0 Vdc
cutin set point
DOWN
INC
DEC
PORT
MATE
ADV/FX/INVERTER------P01
adjust
120 Vac
output voltage
DOWN
INC
DEC
PORT
Advanced Menu for Inverter
(Page 1 of 3)
NOTE: The values shown in this illustration
will vary depending on the model of inverter.
ADV/FX/PAGE1
choose category
ADV
INV
CHRG
PG2
Continued on next page....
ADV/FX/CHARGER-------P01
charger
Resetting the Inverter
limit
DOWN
INC
to Factory Defaults
ADV/FX/INVERTER---------
reset FX to factory
ADV/FX/CHARGER-------P01
defaults
DOWN
MORE
charger
limit
DOWN
INC
ADV/FX/INVERTER------P01
choose fx port
then press next
ADV/FX/CHARGER-------P01
EXIT
PORT NEXT
absorb
set point
DOWN
INC
ADV/FX/INVERTER------P01
press button 1
ADV/FX/CHARGER-------P01
Ready
EXIT
1
2
absorb
time limit
DOWN
INC
ADV/FX/INVERTER------P01
press button 2
ADV/FX/CHARGER-------P01
Ready
EXIT
1
2
float
set point
DOWN
INC
ADV/FX/INVERTER------P01
press button 2
Done
ADV/FX/CHARGER-------P01
EXIT
1
2
float
time limit
DOWN
INC
Main Screen
ADV/FX/INVERTER---------
inverter programming
MAIN--------------------
completed
3:02:14P
TOP
ADV
MAIN
SUM STATUS SETUP ADV
12.0Aac
DEC
PORT
12.0 Aac
DEC
PORT
28.8 Vdc
DEC
PORT
ADV/FX/CHARGER-------P01
refloat
25.0 Vdc
set point
1.0 hrs
DOWN
INC
DEC
PORT
DEC
PORT
ADV/FX/CHARGER-------P01
equalize
28.8 Vdc
set point
27.2 Vdc
DOWN
INC
DEC
PORT
DEC
PORT
ADV/FX/CHARGER-------P01
equalize
1.0 hrs
time limit
1.0 hrs
DOWN
INC
DEC
PORT
DEC
PORT
ADV/FX/CHARGER-------P01
charger programming
completed
TOP
ADV
MAIN
Page 6