Alpha Professional Tools WBC5KIT Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemotong Alpha Professional Tools WBC5KIT. Alpha Professional Tools WBC5KIT 12 halaman. Wet blade cutting kit

Halaman Cetak

CreaTING Thread holes for The ProTeCTIVe Guard

Hole Size:

5mm or #8 Drill Bit

assemBly of WBC5KIT/WBC6KIT Guard

STEP 1

Thread Plastic Tie through the

drilled holes in the Safety Guard.

(If using another grinders safety

guard, the guard must be altered to

accommodate the Plastic Ties as

shown above).

STEP 3

Repeat Steps 1 and 2 to completely

secure the Loc-Line Assembly to the

Safety Guard.

Completed

Guard Assembly

Illustration of

Protection Guard

10mm (3/8")

25mm (1")

STEP 2

Place Loc-Line Assembly between

the holes on the Safety Guard and

tighten in place with the Plastic

Ties.

STEP 4

Trim the Plastic Ties with pliers as

shown above.