Alpha Professional Tools WBC5KIT Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alpha Professional Tools WBC5KIT. Alpha Professional Tools WBC5KIT 12 pagina's. Wet blade cutting kit

CreaTING Thread holes for The ProTeCTIVe Guard

Hole Size:
5mm or #8 Drill Bit

assemBly of WBC5KIT/WBC6KIT Guard

STEP 1
1.
Thread Plastic Tie through the
drilled holes in the Safety Guard.
(If using another grinders safety
guard, the guard must be altered to
accommodate the Plastic Ties as
shown above).
STEP 3
3.
Repeat Steps 1 and 2 to completely
secure the Loc-Line Assembly to the
Safety Guard.
Completed
Guard Assembly
5
Illustration of
Protection Guard
10mm (3/8")
25mm (1")
STEP 2
2.
Place Loc-Line Assembly between
the holes on the Safety Guard and
tighten in place with the Plastic
Ties.
STEP 4
4.
Trim the Plastic Ties with pliers as
shown above.