Alpha Technologies Blue Gate A Brave Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Gerbang Alpha Technologies Blue Gate A Brave. Alpha Technologies Blue Gate A Brave 19 halaman. Gsm gate

Halaman Cetak

Connection of antenna

When you connect magnetic antenna keep on mounting at

bigger iron subject. This subject makes „against-weight" at its

depends the power of radiated signal

When you inserted SIM card as same as all cables are

connected (do not forget that Blue gate is connected on

external line not on extension)

230V. Blue LED "feeding" lights up (via LED table) and starts

flashing yellow GSM LED in rhytm of busy tone. After cca 30

seconds the yellow LED start flashing up GSM signal strength

( via LED table).When pick up connected analogue phone or

call to BlueGate from PBX the LED of analogue line lights up

(green LED). In the phone is hearing dial tone of BlueGate. It

is ready to use.

The most often problems during Blue Gate

compact installation:

 All LED is not lighting.Problem in power supply. Check

connection to main 230V as same as connection of

adapter to BlueGate.

 The LED "power supply" lights. When you make connection

to Gate green LED is ON and in handset you hear busy

tone. Yellow LED flashing in period „GSM modul doesnt

communicate with CPU". During work with USB could

be programmed fix communication rate for GSM modul.

Use USB to programm rate on „autobauding".

 The yellow LED flashing in period „PIN unreadable". After

calling to BlueGate you get busy tone. The SIM card

connect device to main