Alpha Technologies Blue Gate A Brave Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Шлюз Alpha Technologies Blue Gate A Brave. Alpha Technologies Blue Gate A Brave 19 сторінок. Gsm gate
Друкувати сторінкуConnection of antenna
When you connect magnetic antenna keep on mounting at
bigger iron subject. This subject makes „against-weight" at its
depends the power of radiated signal
When you inserted SIM card as same as all cables are
connected (do not forget that Blue gate is connected on
external line not on extension)
230V. Blue LED "feeding" lights up (via LED table) and starts
flashing yellow GSM LED in rhytm of busy tone. After cca 30
seconds the yellow LED start flashing up GSM signal strength
( via LED table).When pick up connected analogue phone or
call to BlueGate from PBX the LED of analogue line lights up
(green LED). In the phone is hearing dial tone of BlueGate. It
is ready to use.
The most often problems during Blue Gate
compact installation:
All LED is not lighting.Problem in power supply. Check
connection to main 230V as same as connection of
adapter to BlueGate.
The LED "power supply" lights. When you make connection
to Gate green LED is ON and in handset you hear busy
tone. Yellow LED flashing in period „GSM modul doesnt
communicate with CPU". During work with USB could
be programmed fix communication rate for GSM modul.
Use USB to programm rate on „autobauding".
The yellow LED flashing in period „PIN unreadable". After
calling to BlueGate you get busy tone. The SIM card
connect device to main
4