ALPHA WORKS GUT054 Panduan Operator - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peniup Salju ALPHA WORKS GUT054. ALPHA WORKS GUT054 13 halaman. 10" cordless snow thrower

Halaman Cetak

INFORMATION ABOUT THE CHARGER AND THE CHARGING PROCESS

1. Please check the data marked on the rating plate of the battery charger. Be sure to connect

the battery charger to a power supply with the voltage marked on the rating plate. Never

connect it to a different charger voltage.

2. Protect the battery charger and its cord from damage. Keep the charger and its cord away

from heat, oil and sharp edges.

3. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with grounded appliances Unmodified plugs and matching outlets will reduce

the risk of electric shock.

4. Keep the battery charger, battery pack(s)and the cordless tool out of the reach of children

5. Do not use the supplied battery charger to charge other cordless tools unless indicated as

compatible by the manufacturer.

6. During periods of heavy use, the battery pack will become warm. Allow the battery pack to

cool to room temperature before inserting it into the charger to recharge.

7. Do not overcharge batteries Do not exceed the maximum charging times. These charging

times only apply to discharged batteries. Frequent insertion of a charged or partially charged

battery pack will result in overcharging and cell damage. Do not leave batteries in the

charger for days on end

8. Never use or charge batteries if you suspect that it has been more than 12 months since the

last time they were charged. There is a high probability that the battery pack has already

suffered dangerous damage (exhaustive discharge).

9. Charging batteries at a temperature below

cells and may cause a fire.

10. Do not use batteries that have been exposed to heat during the charging process, as the

battery cells may have suffered dangerous damage.

11. Do not use batteries that have suffered curvature or deformation during the charging

process or those that exhibit other atypical symptoms (gassing hissing, cracking, etc.)

41°F /5°C

will cause chemical damage to the