ALPHA WORKS GUT054 운영자 매뉴얼 - 페이지 6

{카테고리_이름} ALPHA WORKS GUT054에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALPHA WORKS GUT054 13 페이지. 10" cordless snow thrower

INFORMATION ABOUT THE CHARGER AND THE CHARGING PROCESS
1. Please check the data marked on the rating plate of the battery charger. Be sure to connect
the battery charger to a power supply with the voltage marked on the rating plate. Never
connect it to a different charger voltage.
2. Protect the battery charger and its cord from damage. Keep the charger and its cord away
from heat, oil and sharp edges.
3. Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with grounded appliances Unmodified plugs and matching outlets will reduce
the risk of electric shock.
4. Keep the battery charger, battery pack(s)and the cordless tool out of the reach of children
5. Do not use the supplied battery charger to charge other cordless tools unless indicated as
compatible by the manufacturer.
6. During periods of heavy use, the battery pack will become warm. Allow the battery pack to
cool to room temperature before inserting it into the charger to recharge.
7. Do not overcharge batteries Do not exceed the maximum charging times. These charging
times only apply to discharged batteries. Frequent insertion of a charged or partially charged
battery pack will result in overcharging and cell damage. Do not leave batteries in the
charger for days on end
8. Never use or charge batteries if you suspect that it has been more than 12 months since the
last time they were charged. There is a high probability that the battery pack has already
suffered dangerous damage (exhaustive discharge).
9. Charging batteries at a temperature below
cells and may cause a fire.
10. Do not use batteries that have been exposed to heat during the charging process, as the
battery cells may have suffered dangerous damage.
11. Do not use batteries that have suffered curvature or deformation during the charging
process or those that exhibit other atypical symptoms (gassing hissing, cracking, etc.)
5
41°F /5°C
will cause chemical damage to the