AXITEC AXIbox 11K Panduan Instalasi dan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pengisi Daya Baterai AXITEC AXIbox 11K. AXITEC AXIbox 11K 13 halaman.

4.2.2 Ending the charging process

1. Stop the charging process at the car. When the car is fully charged, charging will stop.

2. Disconnect the charging plug from the vehicle and stow it in the wallbox.

The change between the operating modes Plug & Play and operation with RFID card can only be carried out

by an electrician. The change that must be made to the internal electronics is described under Fehler!

Verweisquelle konnte nicht gefunden werden..

In the event of a fault, switch off the associated building-side fuse of the charging system and thus

disconnect it from the power supply. Ensure that the fuse is not switched on again before rectifying the

fault. Contact a qualified electrician.

EN211103

Installationsanleitung AXIbox 11K