- ページ 6

バッテリーチャージャー AXITEC AXIbox 11KのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AXITEC AXIbox 11K 13 ページ。

ページを印刷する
AXITEC AXIbox 11K 設置および操作マニュアル

4.2.2 Ending the charging process

1. Stop the charging process at the car. When the car is fully charged, charging will stop.
2. Disconnect the charging plug from the vehicle and stow it in the wallbox.

4.3 Changing the operation mode

The change between the operating modes Plug & Play and operation with RFID card can only be carried out
by an electrician. The change that must be made to the internal electronics is described under Fehler!
Verweisquelle konnte nicht gefunden werden..

4.4 Behaviour in the event of an error

In the event of a fault, switch off the associated building-side fuse of the charging system and thus
disconnect it from the power supply. Ensure that the fuse is not switched on again before rectifying the
fault. Contact a qualified electrician.
EN211103
Installationsanleitung AXIbox 11K
6