Olympus BX53 Petunjuk Manual - Halaman 19

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BX53. Olympus BX53 48 halaman. Polarizing microscope
Juga untuk Olympus BX53: Panduan Pengguna (9 halaman), Petunjuk Manual (36 halaman)

Halaman Cetak

Fig. 14

OUT

Fig. 15

Fig. 16

Fig. 17

Using Built-In Filters (Figs. 14 & 15)

Use the filter knobs to engage or disengage the corresponding filters into

or from the light path.

ND6 (Neutral Density filter for light adjustment, transmittance 6%)

ND25 (Neutral Density filter for light adjustment, transmittance

25%)

LBD (for color balancing, daylight filter)

Assuming that you face the microscope from the front panel, push in a

filter knob on the right or pull out a filter knob on the left to engage the

corresponding filter in the light path. The filter can be disengaged from

the light path by reversing the above.

} When pushing in a filter knob, push it all the way to ensure engagement

of the corresponding filter. If the filter is engaged incompletely, optimum

observation may be impossible.

OUT

Mounting a Single Filter (Fig. 16)

A filter with a diameter of 45 mm 5 can be placed on the filter mount on

the base. If you need to place multiple filters, please purchase the U-FC

filter cassette.

Even when a filter cassette is used, a filter with thickness of no

CAUTION

more than 3 mm can still be placed on the filter mount.

Using the Filter Cassette (Figs. 17 to 20)

Loading Filters into Filter Cassette

} The filter cassette accommodates filters with a diameter of 45 mm and

thickness of 2.7 mm or less.

} The filter cassette has two filter levels on the right side and one on the

left side.

} When the filter cassette is used, the ECO mode cannot be used because

the human sensor is hidden by the filter cassette.

1. Move all filter levers to the OUT position except for the one belonging to

the slot into which the filter is to be inserted.

2. Slide the lever 6 to the IN position. Make sure that it clicks securely into

place. (Fig. 17)

3. Holding the lever in the position shown in Fig. 17, put the filter into the

cassette by inserting it in the direction indicated by the arrow.

4. Insert the other two filters in the same manner.

Filter Type/Purpose

BX53