Olympus BXFMA-F Petunjuk Manual - Halaman 17

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BXFMA-F. Olympus BXFMA-F 36 halaman. Motorized illumination system with motorized focusing unit

Halaman Cetak

Fig. 9

Fig. 10

4. Approach the objective to the specimen until the height you want to set

as the lower hardware limit height.

5. Loosen the limit position clamping screw 1 using the provided Allen

wrench (width across flats 1.5 mm).

6. Turn the limit position adjustment knob 2 until the LED 3, which has

been OFF, turns ON.

7. Tighten the limit position clamping screw 1 using the Allen wrench (width

across flats 1.5 mm).

Using the Filters

}Filters (Up to two filters*) can be inserted in the filter slider, which can be

engaged in or disengaged from the light path using a knob 1.

* The two filters are always engaged or disengaged together.

Inserting the Filters

1. Using the Allen screwdriver, loosen and remove the screws 2 clamping

the filter slider.

2. Take out the push ring 3 from the filter slider, place the desired filter(s) 4

and hold the filter(s) with the push ring.

3. Attach the filter slider to the original position.

Applicable Filters and Their Purposes

Applicable Filter

32LBD

32IF550

32ND25

32ND6

32FR

Purpose

Color temperature conversion filter for turning the illumi-

nation light to daylight.

For use in general observation or color photomicrography.

Green filter for giving contrast to a monochrome image.

For use in monochrome photomicrography.

Light adjustment filter.

(Transmittance 25%)

Light adjustment filter

(Transmittance 6%)

Frost filter obtaining regular illumination field, though the

brightness is reduced slightly.

BXFMA

(Figs. 9 & 10)