Olympus CHD Petunjuk Manual - Halaman 9

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus CHD. Olympus CHD 17 halaman. Biological microscope
Juga untuk Olympus CHD: Petunjuk Manual (16 halaman)

Halaman Cetak

Fig. 2

(J)

Use of an eyepiece micrometer

An eyepiece micrometer (10

mm/100~

(optionally available) can be

inserted into the eyepiece CWHK10X in the following procedure:

1) Remove the retaining ring'

1./

from the lower end of the eyepiece

and place the micrometer on the retaining ring with the reticle-

engraved surface, facing downward. (Fig. 2)

Be certain to clean the micrometer disc before inserting into the

eyepiece.

Return the retaining ring into the eyepiece and insert the eyepiece

into the eyepiece tube.

Fig.

Fig. 5

III

Mounting the objectives

1) Lower the stage by means of the coarse adjustment knobs.

2) Screw the objectives into the nosepiece, from low power to higher

power in a clockwise direction. (Fig.

Close the empty aperture in the nosepiece with a plug

provided.

(Fig. 3)

Mounting the mechanical stage

Mount the mechanical stage on the plain stage

in a manner that

the specimen traversing guide of the mechanical stage is located

closest to the pillar, and tighten the stage clamping screws

with

a coin. (Fig. 4)

• Insertion of stage clips

The plain stage is pre-drilled for insertion of the stage clips when the

mechanical stage is not attached (see page 4).

Mounting the condenser

Insert the condenser into the condenser holder, with the condenser

iris diaphragm lever

(1),

directing in the microscope front, and

tighten the clamping screw (2) . (Fig. 5)

1 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - -