Olympus CX43-RFAB Petunjuk Manual - Halaman 15
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus CX43-RFAB. Olympus CX43-RFAB 24 halaman. B excitation fluorescence illuminator
Halaman Cetak
- 1. Table of Contents
- 2. Introduction
- 3. Safety Precautions
- 4. Nomenclature of Microscope Operating Portions
- 5. Reflected Fluorescence Observation Method
- 6. Operation Procedures
- 6. Operating the B Excitation Fluorescence Illuminator
- 6. Escaping the Condenser Top Lens
- 7. 4 Assembly
- 7. Attaching the B Excitation Fluorescence Illuminator
- 7. Connecting the AC Adapter and Power Cord
- 7. Attaching the Hook Stick Holder
- 8. Specifications
2
Connecting the AC adapter and power cord
Always use the AC adapter and power cord provided by Olympus. If the proper AC adapter and the
CAUTION
power cord are not used, the electric safety and the EMC (Electro-Magnetic Compatibility) performance
of the product cannot be assured. If no power cord is provided, please select the proper power cord by
referring to the section "Proper selection of the power cord" at the end of this instruction manual.
c
1
a
b
e
d
2
f
3
NOTE
1
Connect the output connector
nector
2
Connect the connector portion
g
3
Connect the power cord's plug
· The power cord and AC adapter cord are vulnerable when
bent or twisted. Never subject them to excessive force.
· Be sure to set the main switch of the B excitation
fluorescence illuminator
the AC adapter and the power cord.
c
on the rear of the microscope.
e
completely.
CX43-RFAB
a
to
(OFF) before connecting
b
of the AC adapter to the input con-
d
of the power cord to the connector
g
f
to the power outlet
on the wall.
11