Olympus CX43-RFAB Petunjuk Manual - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus CX43-RFAB. Olympus CX43-RFAB 24 halaman. B excitation fluorescence illuminator
Halaman Cetak
- 1. Table of Contents
- 2. Introduction
- 3. Safety Precautions
- 4. Nomenclature of Microscope Operating Portions
- 5. Reflected Fluorescence Observation Method
- 6. Operation Procedures
- 6. Operating the B Excitation Fluorescence Illuminator
- 6. Escaping the Condenser Top Lens
- 7. 4 Assembly
- 7. Attaching the B Excitation Fluorescence Illuminator
- 7. Connecting the AC Adapter and Power Cord
- 7. Attaching the Hook Stick Holder
- 8. Specifications
Safety precautions
CAUTION - Electric safety -
Always use the AC adapter and power cord provided by Olympus.
If the proper AC adapter and the power cord are not used, the electric safety and the EMC (Electro-Magnetic Compat-
ibility) performance of the product cannot be assured. If no power cord is provided, please select the proper power
cord by referring to the section "Proper selection of the power cord" at the end of this instruction manual.
Always connect the ground terminal.
Check that the ground terminal of the power cord and that of the power outlet are connected properly. If the product is
not grounded, our intended electric safety and EMC performance of the product cannot be assured.
Do not use this product near the sources of strong electromagnetic radiation.
Proper operation may be interfered. Be sure to evaluate the electromagnetic environment before operating the product.
Disconnect the power cord in case of emergency.
In case of emergency, disconnect the power cord from the power cord connector of the product or from the power
outlet.
Install the product at the location where you can reach the power cord connector or the power outlet with your hand to
disconnect the power cord immediately.
This product complies with the emission and immunity requirements described in IEC61326 series.
2