Olympus IX81 Brosur & Spesifikasi - Halaman 15

Jelajahi secara online atau unduh pdf Brosur & Spesifikasi untuk Mikroskop Olympus IX81. Olympus IX81 16 halaman. Ix2 series research inverted system microscope

Halaman Cetak

IX71 specifications

Microscope body

Revolving nosepiece

Focus

Primary image port

Frontal operation

Transmitted light

100 W transmitted light

IX2-ILL100

illuminator

illumination pillar

External power supply unit

TH4-100/200

Observation tube

Tilting binocular tube

U-TBI90

Binocular tube

U-BI90CT

U-BI90

Trinocular tube

U-TR30H-2+IX-ATU

Stage

Cross stage with flexible right handle

IX2-SFR

Cross stage with short left handle

IX-SVL2

Plain stage

IX2-SP

IX-MVR

Narrow plain stage

IX2-KSP

CK40-MVR

Gliding stage

IX2-GS

Condenser

Long working distance universal

IX2-LWUCD

Long working distance Relief Contrast

IX2-MLWCD

Ultra long working distance

IX-ULWCD

Water immersion DIC

IX2-DICD + IX2-TLW Single position for optical device (include two optical device holders),

Eyepiece

WHN10X

WHN10X-H

Reflected light

Fluorescence illuminator

IX2-RFAL

fluorescence unit

IX2-RFA

Fluorescence cube turret

IX2-RFAC

Light source

IX81 specifications

Microscope body

Revolving nosepiece

Focus

Primary image port

Frontal operation

Transmitted light

100 W transmitted light

IX2-ILL100

illuminator

illumination pillar

External power supply unit

IX2-UCB2

Observation tube

Tilting binocular tube

U-TBI90

Binocular tube

U-BI90CT

U-BI90

Trinocular tube

U-TR30H-2+IX-ATU

Stage

Cross stage with flexible right handle

IX2-SFR

Cross stage with short left handle

IX-SVL2

Plain stage

IX2-SP

Narrow plain stage

IX2-KSP

CK40-MVR

Gliding stage

IX2-GS

Condenser

Motorized long working

IX2-LWUCDA2

distance universal

Long working distance Relief Contrast

IX2-MLWCD

Eyepiece

WHN10X

WHN10X-H

Reflected light

Fluorescence illuminator

IX2-RFAL

fluorescence unit

IX2-RFA

Fluorescence cube turret

IX2-RFACA

Light source

IX81-ZDC specifications

Focusing position

Dry objective

Interface between air and cover glass

Oil immersion objective

Interface between sample (cultured liquid) and cover glass

Offset method

Controlled by software

Compensation for shift of observation position toward the focusing plane is by Z-axis control (built into the IX81-ZDC)

Observation methods

Fluorescence /DIC: DIC cannot be used beside gray-sensitive colors.

Dichromatic mirror IN/OUT method for AF laser introduction

Manual exchange

F.N. limitation

Light volume is low at the image perimeter for F.N. 22 when using 2X, 4X, 10X objectives

Focusing speed

Within approx. 0.8 seconds (average) from near focusing position)

(not including offset time through software

Focusing accuracy

±0.3 µm (when environmental temperature change is within 5°C)

Laser safety standard

Class 1 (JISC6802, IEC825, CDRH)

Laser safety function

Front monitor method (Laser light volume by special PD)

Camera port

Left side port

Can only be combined with U-TV1X-2+U-CMAD3, U-DPCAD, U-SIP (primary image , 1X)

Observation tube

IX-ATU+U-TR30H-2+IX-TVAD+U-CMT

IX-ATU+U-TR30-2+U-TV1X-2+U-CMAD3

Sextuple, simple waterproof mechanism incorporated

9 mm stroke (from stage surface, 7 mm upward and 2 mm downward), coaxial coarse and fine focusing knobs (minimum fine

focus graduation: 1 µm, full rotation of fine focusing knobs: 100 µm), upper limit stopper, torque adjustment for coarse focusing

Lower port (standard left side port: S1F 100% or S8F 80%, or optional lower Back port selectable, 2-step light path selection),

Upper port when built-in magnification changer 1X/1.6X is replaced (optional right side port),

Bottom port (option)

Light path selector, Transmitted light intensity control and light ON/OFF switch, TTL Pulse control switch

Pillar tilt mechanism (30° inclination angle, with vibration reducing mechanism),

Condenser holder (with 50 mm stroke, swing-in/out mechanism),

Field iris diaphragm adjustable, 4 filter holders (ø45 mm, t=6 mm or less)

Two versions available (100 V and 200 V), Optional TH4-HS hand switch can be used, 2.2 kg weight

35-85° continuous angle adjustable (eyepoint height range: 406 mm-471 mm),

interpupillary distance adjustable between 50-76 mm, diopter adjustment function, erect image, F.N. 22

Built-in focusing telescope, interpupillary distance adjustable 50-76 mm, diopter adjustment function, F.N. 22

Interpupillary distance adjustable 50-76 mm, diopter adjustment function, F.N. 22

3 step optical path selectable (observation : straight port = 100:0, 20:80, 0:100),

interpupillary distance adjustable 50-76 mm, diopter adjustment function, F.N. 22

50 mm (X) X 50 mm (Y) stroke, stage insert plate exchangeable (ø110 mm)

50 mm (X) X 43 mm (Y) stroke, stage insert plate exchangeable (ø110 mm)

232 mm (X) X 240 mm (Y) stage size, stage insert plate exchangeable (ø110 mm)

Mechanical stage to be used with IX2-SP, 130 mm (X) X 85 mm (Y) stroke

160 mm (X) X 240 mm (Y) stage size, stage insert plate exchangeable (ø110 mm)

Mechanical stage to be used with IX2-KSP, 120 mm (X) X 78 mm (Y) stroke

Upper circular stage 360° rotatable, 20 mm (X/Y) travel

5 positions for optical devices (3 positions for ø30 mm and 2 position for ø38 mm),

aperture iris diaphragm adjustable, N.A. 0.55 / W.D. 27 mm

4 positions for optical devices (for ø50 mm, Relief Contrast optical devices rotatable),

aperture iris diaphragm adjustable, N.A. 0.5 / W.D. 45 mm

4 positions for optical devices (for ø29 mm), aperture iris diaphragm adjustable, N.A. 0.3 / W.D. 73 mm

40° injection pipette or electrode insertion angle, aperture iris diaphragm adjustable, N.A. 0.9 / W.D. 3.7 mm

High eyepoint, F.N. 22

High eyepoint, diopter adjustment function, F.N. 22

L-shaped design with exchangeable F.S. and A.S. modules, two filter holder sliders (2 positions, ø32 mm, t=6 mm or less)

Straight design with field iris diaphragm, filter holder slider (2 positions, ø32 mm, t=6 mm or less)

6 positions in a rotating turret, built-in shutter

100 W Hg lamp housing and transformer, or 75 W Xe lamp housing and transformer

Sextuple motorized with objective lens retraction in PC mode,

simple waterproof mechanism incorporated

9 mm stroke (from stage surface, 7 mm upward and 2 mm downward), fine/coarse switchable focusing knobs (minimum

graduation: 0.01 µm), objective lens escape/return buttons and return to memory position buttons (each side of microscope

frame)

Lower port (standard left side port: S1F 100% or S8F 80%, or optional lower Back port selectable, 2-step light path selection),

Upper port when built-in magnification changer 1X/1.6X is replaced (optional right side port),

Bottom port (option)

Light path selector button, Transmitted light intensity control buttons and light ON/OFF switch button, Fine/Coarse focus

selector button, TTL Pulse control switch (auxiliary) buttons

Pillar tilt mechanism (30° inclination angle, with vibration reducing mechanism),

Condenser holder (with 50 mm stroke, swing-in/out mechanism), Field iris diaphragm adjustable,

4 filter holders (ø45 mm, t=6 mm or less)

Auto voltage selector (100 V / 200 V), RS232C interface for PC operation, IX2-BSW driver software

35-85° continuous angle adjustable (eyepoint height range: 406 mm-471 mm),

interpupillary distance adjustable between 50-76 mm, diopter adjustment function, erect image, F.N. 22

Built-in focusing telescope, interpupillary distance adjustable 50-76 mm, diopter adjustment function, F.N. 22

Interpupillary distance adjustable 50-76 mm, diopter adjustment function, F.N. 22

3 step optical path selectable (observation: straight port = 100:0, 20:80, 0:100), interpupillary distance adjustable 50-76 mm,

diopter adjustment function, F.N. 22

50 mm(X) X 50 mm(Y) stroke, stage insert plate exchangeable (ø110 mm)

50 mm(X) X 43 mm(Y) stroke, stage insert plate exchangeable (ø110 mm)

232 mm(X) X 240 mm(Y) stage size, stage insert plate exchangeable (ø110 mm)

160 mm(X) X 240 mm(Y) stage size, stage insert plate exchangeable (ø110 mm)

Mechanical stage to be used with IX2-KSP, 120 mm (X) X 78 mm (Y) stroke

Upper circular stage 360° rotatable, 20 mm(X/Y) travel

Motorized turret with 6 position slots for optical devices (3 positions each for ø30 mm and ø38 mm),

aperture iris diaphragm adjustable, N.A. 0.55 / W.D. 27 mm

4 positions for optical devices (for ø50 mm, Relief Contrast optical devices rotatable), aperture iris diaphragm adjustable,

N.A. 0.5 / W.D. 45 mm

High eyepoint, F.N. 22

High eyepoint, diopter adjustment function, F.N. 22

L-shaped design with exchangeable F.S. and A.S. modules, two filter holder sliders (2 positions, ø32 mm, t=6 mm or less)

Straight design with field iris diaphragm, filter holder slider (2 positions, ø32 mm, t=6 mm or less)

Motorized turret with 6 positions, built-in shutter

100 W Hg apo lamp housing and transformer, 100 W Hg lamp housing and transformer or

75 W Xe lamp housing and transformer

Speed also varies according to the start position of auto focusing, and

individual PC performance

IEC60825

IX71 dimensions

*243~391

135

394

290

Weight: 16 kg Power consumption: 200 VA

* Lengths with an asterisk (*) vary according to interpupilllary distance.

IX71+fluorescence illuminator combination dimensions

*243~391

135

394

290

584

Weight: 20.2 kg Power consumption: 480 VA

* Lengths with an asterisk (*) vary according to interpupilllary distance.

IX81-ZDC dimensions

368

135

394

290

584

(unit: mm)

IX81 dimensions

*243

391

135

394

290

Weight: 16.9 kg Power consumption: 350 VA

* Lengths with an asterisk (*) vary according to interpupilllary distance.

(unit: mm)

IX71+L-shaped fluorescence illuminator dimensions

*243~391

135

290

549

Weight: 21.2 kg Power consumption: 480 VA

* Lengths with an asterisk (*) vary according to interpupilllary distance.

(unit: mm)

TH4 dimensions

200

14.5

IX2-UCB2 dimensions

RMT

ERR

IX-UBC

RSHT

FW1

FW2

FW3

CDT

Z/AF

SW1

OFF

SW2

RS232C

See manual

125

310

332 (depth)

U-HSTR2 dimensions

180

7°

U-FH dimensions

54.0

28.3

35.5

82.3

70.0

4.0

75.5

(unit: mm)

394

453

(unit: mm)