Olympus IX81-ZDC2 Petunjuk Manual - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus IX81-ZDC2. Olympus IX81-ZDC2 16 halaman. Focus drift compensating microscope
Halaman Cetak
2
NOMENCLATURE
} The module names enclosed in
The assembly and adjustments are to be done by Olympus.
Also when the system is going to be transported and reinstalled, consult Olympus.
Warning label
Contact Olympus if this is
peeled off.
AF sensor unit
IR slider
Provided with the
IX81-ZDC2 system
Application software
Use a system meeting the
IEC60950 requirements.
7
are involved in focus drift compensation.
CCD camera
Focus Handle Interface
U-IFFH
PC
Focus Handle
U-FH
Stage
Class 1 laser
output direction
AF port switching lever
Pulled-out position: OUT.
Pushed-in position: IN.
Hand Switch
U-HSTR2
Wavelength : 785 [nm]
Beam divergence :
@Objectives attached
0 to 1.49 [NA] *
Depend on objective lens
2Objectives removed
-0.14 to 0.03 [deg]
Depend on offset lens position
Pulse duration : 2.5 [ms]
Pulse repetition rate : 100 [Hz]
Maximum power output : 127.5 [µW]
AF port switching unit
Microscope Frame
Control board
· I2-ZDC2PCB
This board can be
used only with a
ZDC2-dedicated
microscope frame
(IX81F-ZDC2 or
IX81S1F-ZDC2).
Control Box
IX2-UCB