Olympus MX61L Panduan Perakitan - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mikroskop Olympus MX61L. Olympus MX61L 49 halaman. 200mm/300mm compatible semiconductor/fpd inspection microscopes
Halaman Cetak
Cube Status Check
Functions
1. Checks the current status of the cube (mirror unit) in the optical axis.
Command descriptions
Command
1CUBE?
)
"
" represents a space.
*
Line feed command <CR><LF> is required after commands and line feed command <CR><LF> are added after any
response.
Unit Presence
Functions
1. Checks if units are connected to the MX61/61L.
Command descriptions
Command
1UNIT?
Response parameters
Parameter No.
P0
P1
P2
)
"
" represents a space.
*
Line feed command <CR><LF> is required after commands and line feed command <CR><LF> are added after any
response.
35
Type
Description
Query
Check of the
current status of
the cube en-
gaged in the
optical axis.
Type
Description
Query
Check the
connected
units.
String
MX2
System ID. This is always present.
RV2
U-D5BDREMC/U-P5REMC
RV3
U-D6REMC
None
Nosepiece not connected.
HS
U-HSTR2 is present.
None
U-HSTR2 not connected.
Response
Result
1CUBE
n
Successful
1CUBE
!,E01150
Error
Response
Result
1UNIT
P0,P1,P2
Successful
1UNIT
!,E01150
Error
Strings specifying the unit
1CUBE?
Description
The cube that is engaged in the
optical axis.
n: 1 = BF (Optional cube)
2 = DF
A string is sent after "1CUBE?
1UNIT?
Description
The P0, P1 and P2 units are con-
nected. (See table below.)
A string is sent after "1UNIT?
".
".