Axminster 107699 Manual Petunjuk Asli - Halaman 9

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Bubut Axminster 107699. Axminster 107699 17 halaman. Woodturning lathe

CLEAR ALL TOOLS AWAY FROM

WORK AREA AND CONNECT TO

THE MAINS SUPPLY!

1. Make sure the speed control dial is turned right down

and press the power switch, see fig 8.

Fig 08

2. Press the 'GREEN' button, the 'LED' indicator comes

on and the lathe starts, see fig 09.

3. Turn the the speed control dial to the required speed,

see fig 10.

PRESS THE RED BUTTON TO

STOP THE LATHE AND SWITCH

OFF THE POWER.

Drive & Live Centre Removal

To remove the drive and live centres, locate the push rod (H), while holding the live centre insert the push rod

through the centre hole of the tailstock wheel and push the live centre out. Repeat the procedure for the drive

centre in the headstock, see fig 11-12.

Fig 11

OPERATING INSTRUCTIONS

DISCONNECT THE LATHE FROM

THE MAINS SUPPLY!

Fig 09-10

Fig 12