Axminster 107699 원본 사용 설명서 - 페이지 9

{카테고리_이름} Axminster 107699에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axminster 107699 17 페이지. Woodturning lathe

CLEAR ALL TOOLS AWAY FROM

WORK AREA AND CONNECT TO

THE MAINS SUPPLY!

1. Make sure the speed control dial is turned right down

and press the power switch, see fig 8.

Fig 08

2. Press the 'GREEN' button, the 'LED' indicator comes

on and the lathe starts, see fig 09.

3. Turn the the speed control dial to the required speed,

see fig 10.

PRESS THE RED BUTTON TO

STOP THE LATHE AND SWITCH

OFF THE POWER.

Drive & Live Centre Removal

To remove the drive and live centres, locate the push rod (H), while holding the live centre insert the push rod

through the centre hole of the tailstock wheel and push the live centre out. Repeat the procedure for the drive

centre in the headstock, see fig 11-12.

Fig 11

OPERATING INSTRUCTIONS

DISCONNECT THE LATHE FROM

THE MAINS SUPPLY!

Fig 09-10

Fig 12