Axminster AW19FM Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Axminster AW19FM. Axminster AW19FM 12 halaman. Morticers
Juga untuk Axminster AW19FM: Panduan Pengguna (20 halaman)
Halaman Cetak
Operating Instructions...
W
A X M I N S T E R
W H I T E
This section refers only to the AW19FTH Morticer
!
Fig 3
Caphead bolt (E)
Fig 4a
Pointer
Table Scale
Fig 5
12
Column tilt assembly
Tilt column
handwheel (F)
Tilt table
handwheel (F)
Fig 4
Worktable gib strip adjusters
Lock
Column lock
pin (G)
Caphead bolt (E)
Fig 5a
Column Scale
The morticer requires only minor maintenance such as routine cleaning and lubrication.
Keep the machine clean and use a light application of thin oil to the moving parts.
Chisels and bits should be kept sharp for best performance, a discoloured tip is usually a
sign of excessive heat caused by a blunt auger and/or chisel. Bits are best sharpened with a
small file and chisels with the special mortice chisel sharpeners available through Axminster
Power Tool Centre (Tel 0800 371822).
Burrs can be removed from the sides of the chisel on a fine oilstone or waterstone but great
care must be taken not to taper the chisel as this will cause the chisel to jam in the timber.
AW19FM Standing Morticer
Un-lock
OIL
Oil
Pointer
Maintenance...
Lever handle mechanism
AW19FTH Tilt Head Morticer
W
A X M I N S T E R
W H I T E
13