ABB ACS 600 Panduan Memulai - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pengontrol ABB ACS 600. ABB ACS 600 10 halaman. Frequency converters equipped with standard application program 5.x
Juga untuk ABB ACS 600: Manual Instalasi (2 halaman)

Halaman Cetak
ABB ACS 600 Panduan Memulai
Start-up Guide
7 – STARTING THE DRIVE THROUGH THE I/O INTERFACE
As default the external start/stop signal is read from the
digital input DI1, and the external speed reference from the
analogue input AI1.
Starting through a digital input:
• Press the LOC/REM key to change to external control
(no L visible on the first row of the panel display).
• Switch on digital input DI1.
Drive starts. The motor is accelerated to a speed
determined by the voltage level of analogue input AI1.
Stopping when in local control: Press
Stopping when in external control: Switch off digital input
DI1.
Press the LOC/REM key to change between local and
external control.
6
START-UP PROCEDURE
8 – STOPPING THE MOTOR
.
Valid if the factory macro is
selected. See Parameter

99.02 APPLICATION MACRO.

Valid if the factory macro is
selected. See Parameter
99.02 APPLICATION MACRO.
Standard Application Program