Accurate Technology DigiStop-10 Panduan Pemasangan & Pengoperasian - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Alat Ukur Accurate Technology DigiStop-10. Accurate Technology DigiStop-10 20 halaman. Digi-stop series

Frequently Asked Questions

What F/W (Firmware) version do I have?
The readout will display d 2.xxx on power up.
This is the firmware version of your readout .
The readings are "backwards"?
You can change reading direction of the Digi-Fence by changing the value of
Programming Parameter Pr 2.
The keys don't seem to do what they are supposed to do.
Timing, which is how long a key is depressed, and the combination of the keys
pressed is important. This manual uses the term '"momentarily" to describe a
key press of shorter than 1 second. Whereas the term "press and hold" is used
to describe a key press of longer than 1.5 seconds. As an example; when using
a PC keyboard to type a capital letter you would "press and hold" the SHIFT
key and "momentarily depress the LETTER key. In addition most of the key
"functions" are executed on RELEASE, not press. This is important since some
of the same keys execute different functions based on how long they are
pressed and when they are released. These key operations, once tried will
quickly become intuitive.
no Enc
What does
If the encoder cable is unplugged from the readout , no Enc will appear on the
display. To clear: Be sure the encoder is on the scale and plugged into the
readout.
b FAIL
What does
When the readout displays this message it means the battery voltage has
dropped to a level where reliable operation is no longer possible. Install new
batteries to clear this message.
P FAIL
What does
When the readout displays this message it means the battery voltage has
dropped to a level where reliable programming is not possible. Install new
batteries to clear this message.
Manual Part # 800-1070-001 Rev 10-2016
mean?
mean?
mean?
Page 18 of 20