3Com CoreBuilder 3500 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih 3Com CoreBuilder 3500. 3Com CoreBuilder 3500 2 halaman. 3com 350x series ip phones
Juga untuk 3Com CoreBuilder 3500: Panduan Instalasi (13 halaman)

Halaman Cetak

3COM

3503 IP PHONE Requires VCX 9.5 or higher

3502 IP PHONE Requires VCX 9.5 or higher

3501 IP PHONE Requires VCX 9.5 or higher

3500 IP PHONE Requires VCX 9.5 or higher

3500B IP PHONE Requires VCX 9.5 or higher

WARNING: 3Com 350x Series IP Phones are intended for connection only on Local Area Network. Do not

connect them to any networking device outside of the building in which the IP Phones are located.

Phone Installers This document explains how to connect and activate

Packing List

a 3Com 350x Series IP Phones to a 3Com VCX™ IP Telephony

3Com 350x Series IP Phone

Solution. For complete installation information, see the related

Phone stand

installation guide for your phone system.

Phone handset and handset cord

Phone Users For information on using your IP Phones, see the

Ethernet cable

appropriate Quick Reference Guide or IP Phones Guide. If your system

Warranty sheet

uses a third-party messaging application, refer to that application's

Compliance and Satety Manual

guide.

Instructions for Use with the 3Com VCX™ IP Telephony Solution

In a VCX environment, the system administrator performs configuration tasks before the system recognizes a new IP Phone

and allows user login. After the administrator provides you with an extension number and a password, you can login to the IP

Phone. On the top of the display panel on the IP Phone shows the date, time, extension number, and login status icon.

For the 3Com 3503 IP phone,

indicates that you are logged off,

For other 3Com 350x series IP phones,

indicates that you are logged off,

If you are logged off, you can use these steps to log in:

1 Press Menu Button + 4.

2 Enter your VCX password at the prompt and then press #.If the login fails, contact the system administrator.

Initializing your Voice Mailbox

Initializing the voice mailbox enables you to retrieve and manage your voice mail. To initialize the voice mailbox, press the

Message button, identified by this icon:

. Follow the system prompts to change the default personal password and to

create a name announcement and a personal greeting.

These instructions might be superseded by your organization's network configuration and operating

practices. See your system administrator or the relevant installation guide for more information about initial

phone configuration.

Connecting the IP Phones (3500 shown)

350x SERIES IP PHONES QUICK START

indicates that you are logged in;

indicates that you are logged in.

1 Power connector

For optional AC power adapter. 3Com 350x Series IP

Phones can operate with either an AC power adapter or

power received through the Ethernet connection. See

3Com 350x Series IP Phones Compliance and Safety

Manual for connection details.

2 Handset connector

Connect one end of the handset cable to the handset and

the other end to the handset connector.

3 Headset connector

Optionally, connect a headset to the IP Phone.

4 Network port connector

Optionally, use an Ethernet cable to connect your

computer or an Attendant Console to the network.

5 Network connector

Use an Ethernet cable to connect the IP Phone to the

LAN.

Connecting the phone Stand (3503 shown)

Connect the cables first (route the network cables

through the stand), and then mount the stand to the rear

panel of the IP Phone.

Removing the phone Stand (3503 shown)

Optional Components

Wall Mount

Stand

0231A0ER

0231A0ES

(UC2M1WM)

(UC21M1BRACKET)

The phone stand can support two different heights (55 and

35 degrees).

To remove the stand, hold the phone with one hand and

hold the stand with another hand, then pull the stand with

proper strength to separate it from the phone.

Power Adapter

0231A0EQ

(AC-FSP25-OVS)

3101A0AV

AP100-20091203