Epson 875DCS - Stylus Photo Color Inkjet Printer Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Printer Epson 875DCS - Stylus Photo Color Inkjet Printer. Epson 875DCS - Stylus Photo Color Inkjet Printer 13 halaman. Epson stylus photo 875dcs
Juga untuk Epson 875DCS - Stylus Photo Color Inkjet Printer: Spesifikasi (2 halaman), Panduan Tambahan (2 halaman)

Halaman Cetak

Epson 875DCS - Stylus Photo Color Inkjet Printer Manual

EPSON Stylus Photo 875DCS

6. Select the most precise alignment pattern from the choices

on the test page. Enter the number of the best aligned

pattern following the instructions on the screen (pattern 8 is

the current setting). You may need to repeat steps 5 and 6

more than once to align your print head completely.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year. Follow these steps:

1. Turn off the printer and wait for the P power light to go

out.

2. Unplug the power cord and disconnect the USB cable.

3. Remove all the paper from the sheet feeder.

4. Clean the exterior of the printer with a soft, damp cloth.

5. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use a hard or abrasive brush, or alcohol or thinner

for cleaning; they can damage the printer components

and case.

Don't get water on the printer components and don't

spray lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or one of a similar size.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

Follow these steps:

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the USB cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

13 - EPSON Stylus Photo 875DCS

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 11); if output is

misaligned, align the print head (see page 12).

Epson 875DCS - Stylus Photo Color Inkjet Printer Manual - Halaman 12

Cleaning the Printer

Transporting the Printer

Related Documentation