Epson 875DCS - Stylus Photo Color Inkjet Printer Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для Принтер Epson 875DCS - Stylus Photo Color Inkjet Printer. Epson 875DCS - Stylus Photo Color Inkjet Printer 13 сторінок. Epson stylus photo 875dcs
Також для Epson 875DCS - Stylus Photo Color Inkjet Printer: Технічні характеристики (2 сторінок), Додатковий посібник (2 сторінок)

Epson 875DCS - Stylus Photo Color Inkjet Printer Посібник
EPSON Stylus Photo 875DCS
6. Select the most precise alignment pattern from the choices
on the test page. Enter the number of the best aligned
pattern following the instructions on the screen (pattern 8 is
the current setting). You may need to repeat steps 5 and 6
more than once to align your print head completely.

Cleaning the Printer

To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1. Turn off the printer and wait for the P power light to go
out.
2. Unplug the power cord and disconnect the USB cable.
3. Remove all the paper from the sheet feeder.
4. Clean the exterior of the printer with a soft, damp cloth.
5. Clean ink out of the printer's interior with a soft, damp
cloth.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
Follow these steps:
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the USB cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
13 - EPSON Stylus Photo 875DCS
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 11); if output is
misaligned, align the print head (see page 12).

Related Documentation

TM-SP875DCS EPSON Stylus Photo 875DCS Service
Manual
PL-SP875DCS
EPSON Stylus Photo 875DCS Parts Price
List
CPD-11115
EPSON Stylus Photo 875DCS Printer
Basics
CPD-11116
EPSON Stylus Photo 875DCS Start Here
CPD-11117
EPSON Stylus Photo 875DCS printer
software CD-ROM
9/00
Tape the ink cartridge holder
to the printer case