Epson 9800 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Printer Epson 9800 - Stylus Pro Color Inkjet Printer. Epson 9800 - Stylus Pro Color Inkjet Printer 12 halaman. Stylus pro 800 series
Juga untuk Epson 9800 - Stylus Pro Color Inkjet Printer: Manual Pembongkaran dan Pengaturan (27 halaman), Brosur & Spesifikasi (8 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Brosur & Spesifikasi (6 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

Halaman Cetak
Epson 9800 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat
Checking, Cleaning, and Aligning the Print Head
Checking, Cleaning, and Aligning the Print Head
Checking and Cleaning the Print
Head
If your printed image shows a color shift or horizontal
lines, you should check the print head to see if any nozzles
are clogged or deflected. The printer will then run an
automatic cleaning cycle if necessary.
1
Make sure paper is loaded in the printer.
2
Press the Menu button.
3
to highlight TEST PRINT, then press
Press
Menu. NOZZLE CHECK is selected.
4
Press Menu, then press
nozzle check pattern.
To clean the print head manually, press the Menu button
and hold it for 3 seconds. The cleaning cycle takes about
one minute and does not use any paper.
Note:
You can also run nozzle checks and head cleaning
cycles from your computer using the Epson Printer
Utility (Macintosh) or the Utility tab in your printer driver
(Windows). See your Printer Guide for more information.

Aligning the Print Head

If your prints look grainy or blurry, or you see
misregistration or "ghosting," you need to align the
print head.
1
Make sure the printer is turned on. Then load
Epson Doubleweight Matte, Enhanced Matte, or
Premium Luster Photo Paper.
2
Press the Menu button.
3
button until HEAD ALIGNMENT
Press the
is highlighted. Then press Menu. PAPER
THICKNESS is highlighted.
to start printing the
HEAD ALIGNMENT
PAPER THICKNESS
ALIGNMENT
4
Press the Menu button again. The STANDARD
setting is highlighted. This is the correct thickness
setting for most Epson papers.
5
Press the
button to save the setting.
6
Press , then press
7
Press the Menu button to highlight AUTO, then
press Menu again. UNI-D (uni-directional) is
highlighted. This is the type of alignment to start
with.
8
Press the
button to start the alignment process.
Each head alignment takes about 7 minutes.
Caution:
Make sure you don't open the front cover or
turn off the printer during the alignment process.
9
When the uni-directional alignment is finished, press
button until BI-D 2-COLOR is highlighted.
the
Then press
alignment.
10
When the bi-directional black alignment is finished,
button until BI-D ALL is highlighted.
press the
Then press
.
11
When the final alignment is finished, press the
Pause button.
4
to highlight ALIGNMENT.
ALIGNMENT AUTO
UNI-D
BI-D 2 COLOR
BI-D ALL
again to start the bi-directional black