Epson 9800 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Printer Epson 9800 - Stylus Pro Color Inkjet Printer. Epson 9800 - Stylus Pro Color Inkjet Printer 12 halaman. Stylus pro 800 series
Juga untuk Epson 9800 - Stylus Pro Color Inkjet Printer: Manual Pembongkaran dan Pengaturan (27 halaman), Brosur & Spesifikasi (8 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Brosur & Spesifikasi (6 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

Replacing Printer Parts (continued)

Hold down the side pin, as shown, then turn the

latch to the right.

Release the side pin and carefully remove the cutter

blade.

Insert the new cutter blade.

Hold down its side pin and secure it with

the latch.

Close the front cover. The carriage returns to the

home position.

Replacing the Maintenance Tank

The Epson Stylus Pro 7800 has one maintenance tank

(on the right side) and the 9800 has two (one on either

side). You need to replace the maintenance tank

(part # C12C890191) when you see MAINTENANCE

TANK FULL on the LCD. The ink light also turns red.

If you have the Epson Stylus Pro 9800, check the

LCD to determine which tank needs to be replaced

(left or right).

Note:

The printer will not print if one of the

maintenance tanks is full. On the Epson Stylus

Pro 9800, the right tank is used more than the left.

To maximize tank life, you can switch the tanks.

Make sure the printer is on, and pull out the

maintenance tank as shown.

Caution:

Do not tip the tank, or ink may spill out.

Place the used tank in the plastic bag included with

the new tank.

Insert the new tank.