Epson ActionNote 880 Panduan Informasi Produk
Jelajahi secara online atau unduh pdf Panduan Informasi Produk untuk Printer Epson ActionNote 880. Epson ActionNote 880 11 halaman. Product information guide
Juga untuk Epson ActionNote 880: Penggantian Kartrid (2 halaman)
Halaman Cetak
Front View
suspend/resume button
trackpad
* These parts function only with the optional audio card installed
Rear Panel and Left Side
security
external
keyboard or
mouse pod
*Available only with the optional internal fax/modem installed
Notebook Specifications
CPU and Memory
Upgradable 486 microprocessor installed
CPU
in a PGA socket; includes 8KB of internal
cache in write-back mode and integrated
math coprocessor
System speed
Fast speed and slow speed (8 MHz)
available; speed selection through Setup
diskette
drive
hard disk drive
compartment
PC card
DC-in pod
slots
EPSON ActionNote 800 Series
4MB RAM soldered on the system board;
Memory
configuration may include additional
memory module; expandable up to 24MB
using a 4,8,16, or 20MB memory
expansion module
128KB Flash ROM device containing the
ROM
system and video BIOS and Setup
program code
512KB DRAM supports resolutions up to
Video RAM
640 x 480 in 256 colors on the color LCD
and up to 1024 x 768 in 16 colors or
800 x 600 in 256 colors on external monitor
Cache
8KB internal; supports 256KB of external
cache on a CPU daughterboard; selectable
through Setup
Clock/
Real-time clock, calendar, and CMOS
calendar
RAM; backed up by internal battery
Controllers
Chips and Technology® 65535 video
Video
controller; 32-bit local bus interface to the
microprocessor; supports enhanced video
modes on an external monitor; supports
resolutions from 640 x 480 in 256 colors on
the color LCD and up to 1024 x 768 in 16
colors on an external monitor; automatic
external monitor detection; simultaneous
display with LCD screen using Fn F10
command or software
Built-in super I/O controller for one
Diskette drive
internal 3.5-inch diskette drive; supports
720KB and 1.44MB formats
Hard disk
Built-in super I/O controller has interface
to one 2.5-inch, IDE internal hard disk
drive; automatically recognizes and
configures drives up to 19 mm high that
support the IDE interface
PCMCIA
Built-in Vadem® VG-468 controller for two
stacked slots; supports two Type I or II
cards, or one Type III; PCMCIA version
2.01 and JEIDA 4.1 compatible; supports
low power and suspend modes; supports
hot insertion (including ExCA standards);
register compatible with Intel 82365SL
Interfaces
Auto-sensing, 15-pin, D-sub, female
External VGA
connector for analog monitor
Parallel
Centronics® compatible; 25-pin, D-sub,
female connector; standard S-bit parallel;
supports standard (AT compatible) and
bidirectional (PS/2 compatible) modes
AN800-1