DiGidot C4 Panduan Memulai dengan Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai dengan Cepat untuk Pengontrol DiGidot C4. DiGidot C4 15 halaman.
Juga untuk DiGidot C4: Pengaturan Manual Cepat (2 halaman)

Halaman Cetak

Con guring computer for

connection

Before you can start working with the User Interface

of the DiGidot C4 you should re-conﬁgure your

computer's LAN settings. Note that changing your

Ethernet settings will block your LAN network

connection. If you wish to be connected to the

Internet and using the DiGidot C4, then it is best to

have a computer that has both LAN and Wi-ﬁ

connection. By accessing the User Interface of the

DiGidot C4 you can change the settings, so it ﬁts with

the Art-Net control Software/Device and the type of

LED.

For PC

Go to

Control Panel - Network and Sharing Center - Ethernet

- Properties - Internet Protocol Version 4 (TCP/IPv4) -

Use the following IP address

Then replace the IP settings in the following boxes to:

IP adress: 10.0.0.1

Subnet mask: 255.0.0.0

For Mac

Go to

System Preferences - Network - Ethernet - Conﬁgure

IPv4 - Manual

Then replace the IP settings in the following boxes to:

IP address: 10.0.0.1

Subent mask: 255.0.0.0