DiGidot C4 Quick Start Up Manual - Page 8

Browse online or download pdf Quick Start Up Manual for Controller DiGidot C4. DiGidot C4 15 pages.
Also for DiGidot C4: Quick Manual Setup (2 pages)

Print Page

Con guring computer for

connection

Before you can start working with the User Interface

of the DiGidot C4 you should re-conﬁgure your

computer's LAN settings. Note that changing your

Ethernet settings will block your LAN network

connection. If you wish to be connected to the

Internet and using the DiGidot C4, then it is best to

have a computer that has both LAN and Wi-ﬁ

connection. By accessing the User Interface of the

DiGidot C4 you can change the settings, so it ﬁts with

the Art-Net control Software/Device and the type of

LED.

For PC

Go to

Control Panel - Network and Sharing Center - Ethernet

- Properties - Internet Protocol Version 4 (TCP/IPv4) -

Use the following IP address

Then replace the IP settings in the following boxes to:

IP adress: 10.0.0.1

Subnet mask: 255.0.0.0

For Mac

Go to

System Preferences - Network - Ethernet - Conﬁgure

IPv4 - Manual

Then replace the IP settings in the following boxes to:

IP address: 10.0.0.1

Subent mask: 255.0.0.0