Epson Artisan 810 Series Panduan Instalasi Jaringan - Halaman 33
Jelajahi secara online atau unduh pdf Panduan Instalasi Jaringan untuk Printer Epson Artisan 810 Series. Epson Artisan 810 Series 37 halaman. Color inkjet printer
Juga untuk Epson Artisan 810 Series: Mulai dari Sini Manual (8 halaman), Spesifikasi (2 halaman), Faq (4 halaman), Panduan Servis (20 halaman)
Halaman Cetak
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Scanning Problems
Cannot find the scanner or start Epson Scan
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the printer off and back on, and then try restarting Epson Scan. Check
the
Timeout Setting
Scan Help.
■
If you have a firewall or Internet security software installed, the search feature
in
EPSON Scan Settings
Network Status Sheet (see below), open
(if necessary), click
Network
address manually.
■
If you are scanning a large document at high resolution, a communication
error may occur. If the scan did not complete, lower the resolution.
Cannot scan using the control panel over your network
■
Make sure you've restarted your computer after installing the software and
setting up the network connection. The printer cannot detect your computer
until you've restarted it.
■
Check to make sure your computer isn't in sleep mode.
Print a Network Status Sheet
1. Press the
Home
2. Select
Network Settings
3. Select
Confirm Network Settings
4. Press the x
Start
in
EPSON Scan Settings
may not work correctly. In this case, print a
, click
Add
button, if necessary, and select
.
button to print a network status sheet.
. For details, see the Epson
EPSON Scan Settings
Enter address
Setup
.
, select
, and enter the IP
.
Troubleshooting
33