Epson Artisan 810 Series Посібник з встановлення мережі - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник з встановлення мережі для Принтер Epson Artisan 810 Series. Epson Artisan 810 Series 37 сторінок. Color inkjet printer
Також для Epson Artisan 810 Series: Посібник "Почніть тут (8 сторінок), Технічні характеристики (2 сторінок), Питання (4 сторінок), Посібник з експлуатації (20 сторінок)
Друкувати сторінку
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Scanning Problems
Cannot find the scanner or start Epson Scan
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the printer off and back on, and then try restarting Epson Scan. Check
the
Timeout Setting
Scan Help.
■
If you have a firewall or Internet security software installed, the search feature
in
EPSON Scan Settings
Network Status Sheet (see below), open
(if necessary), click
Network
address manually.
■
If you are scanning a large document at high resolution, a communication
error may occur. If the scan did not complete, lower the resolution.
Cannot scan using the control panel over your network
■
Make sure you've restarted your computer after installing the software and
setting up the network connection. The printer cannot detect your computer
until you've restarted it.
■
Check to make sure your computer isn't in sleep mode.
Print a Network Status Sheet
1. Press the
Home
2. Select
Network Settings
3. Select
Confirm Network Settings
4. Press the x
Start
in
EPSON Scan Settings
may not work correctly. In this case, print a
, click
Add
button, if necessary, and select
.
button to print a network status sheet.
. For details, see the Epson
EPSON Scan Settings
Enter address
Setup
.
, select
, and enter the IP
.
Troubleshooting
33