AYC MAYAKOBA PERLA Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Spa Pedikur AYC MAYAKOBA PERLA. AYC MAYAKOBA PERLA 9 halaman. Whirlpool pedicure spa

Spa Tub Operation

Filling Water

Place the drain plug into the drain from the top (the drain plug may need to be adjusted so that it forms a tight

seal around the drain).

Close the drain plug by turning the drain knob counterclockwise.

Lift the single lever hot/cold mixer faucet to fill the tub to the water level above the whirlpool jet at least 1 inch.

Fill the tub until the pipeless jet is completely submerged in water

If the water level decreases during the operation of the whirlpool, simply add more water.

Starting Whirlpool

Make sure magnet jet head is well attached to the jet motor

Press the whirlpool jet button located on the right side of the front panel to turn on and off.

Draining

Turn the drain knob clockwise to open the drain plug to drain out water.

Press the drain button located on the left side of the front panel to turn on/off the discharge pump (if unit is

equipped with one).

Warning: Do NOT turn on the drain pump unless adequate water is in the tub. THE WARRANTY IS VOID IF THE

PUMP HAS BEEN RUNNING DRY.

Maintenance

AYC GROUP LLC

| Page

of 9