AYC MAYAKOBA PERLA Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Педикюрный спа-центр AYC MAYAKOBA PERLA. AYC MAYAKOBA PERLA 9 страниц. Whirlpool pedicure spa
Spa Tub Operation
Filling Water
-
Place the drain plug into the drain from the top (the drain plug may need to be adjusted so that it forms a tight
seal around the drain).
-
Close the drain plug by turning the drain knob counterclockwise.
-
Lift the single lever hot/cold mixer faucet to fill the tub to the water level above the whirlpool jet at least 1 inch.
Fill the tub until the pipeless jet is completely submerged in water
-
If the water level decreases during the operation of the whirlpool, simply add more water.
Starting Whirlpool
-
Make sure magnet jet head is well attached to the jet motor
-
Press the whirlpool jet button located on the right side of the front panel to turn on and off.
Draining
-
Turn the drain knob clockwise to open the drain plug to drain out water.
-
Press the drain button located on the left side of the front panel to turn on/off the discharge pump (if unit is
equipped with one).
-
Warning: Do NOT turn on the drain pump unless adequate water is in the tub. THE WARRANTY IS VOID IF THE
PUMP HAS BEEN RUNNING DRY.
Maintenance
AYC GROUP LLC
| Page
9
of 9