Ayra ITA3D 710 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan Ayra ITA3D 710. Ayra ITA3D 710 9 halaman. Rgb dmx laser with 3d effect
Halaman Cetak
While in the DMX mode, it is possible to select the working mode of the laser. That way, you can either
choose to use your own programmed presets of your DMX controller, or to activate the music
activated/automatic working mode of the laser to have a fully-automatic lasershow. Depending on the
starting address you selected earlier, the laser responds to the following commands. In this example,
we use DMX starting address 1. When you use a different DMX-starting value, for example 29, the unit
will respond from channel 29, 30, 31.. and so on.
For more information about DMX, consult the manual of your DMX controller or software.
Channel
Function
1
Mode
2
Color/shutter
3
Pattern
selection
4
Movement Y
5
Movement X
6
Rolling X
7
Rolling Y
8
Rotation
9
Zoom
10
Pattern size
11
Display dot
12
Drawing
DMX operating mode
Value
Description
0-49
Sound active mode
50-99
Auto beam mode
100-149
Auto animation mode
150-199
Manual mode auto run
200-255
Manual mode sound-active run
0-255
Closed, single color, flashing color, multi-color and moving
multicolor effects
0-255
256 patterns to be selected
0-127
Manual up/down movement
128-191
Auto down-movement
192-255
Auto up-movement
0-127
Manual left/right movement
128-191
Auto right-movement
192-255
Auto left-movement
0-127
Manual rolling (position)
128-255
Auto rolling (movement)
0-127
Manual rolling (position)
128-255
Auto rolling (movement)
0-127
Manual rotation (position)
128-191
Auto clockwise rotation (movement)
192-255
Auto counter-clockwise rotation (movement)
0-85
Auto zoom (+)
86-170
Auto zoom (-)
171-255
Manual zoom (+/-)
0-255
0 is standard, 1-255 is small to large
0-255
Variable adjustment, 0 is dot-display, 255 is best brightness
0-127
Auto drawing mode 1
128-255
Auto drawing mode 2
8