Digigram EtherSound Aqonda 8 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media Digigram EtherSound Aqonda 8. Digigram EtherSound Aqonda 8 20 halaman. Ethersound audio bridges

Halaman Cetak

SPECIFICATIONS

Configuration

Size
Power supply
Temp / humidity
(non-condensing)
Operating:
Storage:
Power consumption
at 100 V
at 250 V
Net weight
Entrées
(measurements done at 48 kHz, with filter on the 22 Hz - 22 kHz range)
Balanced analog inputs
(mono)
A/D converter resolution
Programmable input gain
Sampling frequency
Maximum input level
(minimum gain)
Maximum input level
(maximum gain)
Input impedance
Frequency response at 48
kHz
Dynamic range
(A-weighted)
THD + noise
1 kHz at –2 dBfs
1 kHz at –6 dBfs
Crosstalk
1 kHz at +22 dBu
15 kHz at +22 dBu
Word Clock
GPI
12
switching-mode, automatic voltage detection
WARNING: Do not open the power supply module. It contains hazardous voltages.
ACHTUNG: Gerät nicht öffnen, Stromschlaggefahr!
Es befinden sich keine vom Nutzer zu wartenden Teile im Inneren!
AQONDA 8:
0.45 A
0.22 A
∼5,25 kg (∼11.57 lbs)
AQONDA 8
8 (line / mic level)
TTL level 44.1 or 48 kHz +/- 5% (75 ohm)
2U 19" Rack: 88x482.6x325 mm
100 – 250 V
, 50-60 Hz
AC
There are no user-serviceable parts inside.
0 °C – 50 °C / 5% - 90%
-5 °C – 70 °C / 0% - 95%
AQONDA 16
24 bits
-22 to 71 dB by steps of 1 dB
48 kHz or 44.1 kHz
+22 dBu
-73 dBu
>5 kΩ
20 Hz - 20 kHz: +0 /-0.5 dB
> 114 dB
< -97 dB
< -100 dB
< -115 dB
< -105 dB
8 'Ground Sensing' inputs
AQONDA 16:
0. 6 A
0.27 A
∼5,75 kg (∼12.68 lbs)
16 (line / mic level)