Digigram EtherSound Aqonda 8 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media Digigram EtherSound Aqonda 8. Digigram EtherSound Aqonda 8 20 halaman. Ethersound audio bridges

Microphone
(measurements done at 48 kHz, with filter on the 22 Hz- 22 kHz range)
Equivalent Input Noise
G=60 dB Z=150 Ohms

Outputs

Servo-balanced analog
outputs (mono)
A/D converter resolution
Sampling frequency
Programmable attenuation
Maximum output
level/impedance
Frequency response at 48
kHz
Dynamic range
(A-weighted)
THD + noise
1 kHz at -2 dBfs
1 kHz at -6 dBfs
Crosstalk:
1 kHz at +22 dBu
15 kHz at +22 dBu
Word Clock
GPO

Connectivity

Analog inputs
Analog outputs
EtherSound
Control
GPI
GPO
Serial port
Word Clock
13
EtherSound AQONDA 8
8 (line level)
-118 dB to 0 dBby steps of 0,5 dB
EtherSound AQONDA 8
8 inputs on female XLR-3
8 outputs on male XLR-3
2 female RJ45 compatible Neutrik
1 female RJ45 compatible Neutrik
8 'Ground Sensing' inputs on 2x8 pins terminal blocks
8 relay outputs on 2x8 pins terminal blocks
Ethernet Audio Switches
< -126 dBu
EtherSound AQONDA 16
24 bits
48 kHz or 44.1 kHz
+22 dBu / < 100 Ω
20 Hz - 20 kHz: +0 /-0.4 dB
> 114 dB
< - 98 dB
< -100 dB
< -115 dB
< -105 dB
TTL level (75 ohm)
8 relay outputs
EtherSound AQONDA 16
16 inputs on female XLR-3
8 outputs on male XLR-3
8 outputs on female DB-25
TM
TM
EtherCon
TM
EtherCon
RS232/422 on DB-9
IN/OUT on BNC
Aqonda 8/16
16 (line level)
(back panel)
(connections "IN"/"OUT")
TM
("DATA"/"CONTROL")