Crenova 6016A Panduan Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Multimeter Crenova 6016A. Crenova 6016A 10 halaman. Clamp digital multimeter

7.Measure limit voltage which is beyond allowed range will cause damage to the clamp meter and injury

to operator. Allowable limit voltage is indicated on the surface of clamp meter. Do not measure input

signal which beyond this standard so as to prevent electric shock or damage to the clamp meter.

8.Do not apply 600V above voltage between clamp meter terminal and earth so as to prevent electric

shock or damage to the clamp meter.

9.Do not attempt to calibrate or repair the clamp meter. When necessary, it should be done by personnel

with specialized training or qualification.

10.When measuring, function/range selection switch must be at correct range gear. When shifting

function/range selection switch, please disconnect the line of test lead from the object under test, and

make sure the input end has no signal input. Do not shift function/range selection switch during

measurement.

11.When LCD shows "

12.Do not change clamp meter circuit without permission, so as to prevent damage to clamp meter or

safety risk.

IV. Safety symbols

Warning

High

voltage

Earth

Double

insulation

Battery

under-volta

V. Surface structure

1.Clamp sensor/Jaw;

2.Instrument meter;

3.Trigger;

4.Function/range switch; for

selecting measurement functions and ranges.

5.(SELECT) shift key of diode/buzzer;

6.(RANGE) shift key of auto/manual;

7.(HOLD) data hold key;

8.(MAX) maximum hold key;

9.LCD display screen;

10.COM input hole: negative input

end, insert black test lead in;

11.VΩ input hole: measure voltage,

resistance, diode and positive input

end of on-off test, insert red test lead in;

", please replace battery in time to make sure measurement accuracy.

AC/DC

European

Union directive

conformity

Fuse