Digilent Pcam 5C 410-358 Panduan Referensi
Jelajahi secara online atau unduh pdf Panduan Referensi untuk Unit Kontrol Digilent Pcam 5C 410-358. Digilent Pcam 5C 410-358 8 halaman. Imaging module
Halaman CetakPcam 5C Reference Manual
The Pcam 5C is an imaging module meant for use with FPGA development boards. The module is
designed around the Omnivision OV5640 5 megapixel (MP) color image sensor. This sensor
includes various internal processing functions that can improve image quality, including automatic
white balance, automatic black level calibration, and controls for adjusting saturation, hue, gamma
and sharpness. Data is transferred over a dual-lane MIPI CSI-2 interface, which provides enough
data bandwidth to support common video streaming formats such as 1080p (at 30 frames per
second) and 720p (at 60 frames per second). The module is connected to the FPGA development
board via a 15-pin flat-flexible cable (FFC) that is pin compatible with the connector found on the
popular Raspberry Pi development board. The Pcam 5C comes with a 10 cm flat-flexible cable and a
factory-installed fixed focus lens with M12 lens mount, so it is ready to use out of the box.