Digilent Pcam 5C 410-358 참조 매뉴얼

{카테고리_이름} Digilent Pcam 5C 410-358에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilent Pcam 5C 410-358 8 페이지. Imaging module

Pcam 5C Reference Manual

The Pcam 5C is an imaging module meant for use with FPGA development boards. The module is

designed around the Omnivision OV5640 5 megapixel (MP) color image sensor. This sensor

includes various internal processing functions that can improve image quality, including automatic

white balance, automatic black level calibration, and controls for adjusting saturation, hue, gamma

and sharpness. Data is transferred over a dual-lane MIPI CSI-2 interface, which provides enough

data bandwidth to support common video streaming formats such as 1080p (at 30 frames per

second) and 720p (at 60 frames per second). The module is connected to the FPGA development

board via a 15-pin flat-flexible cable (FFC) that is pin compatible with the connector found on the

popular Raspberry Pi development board. The Pcam 5C comes with a 10 cm flat-flexible cable and a

factory-installed fixed focus lens with M12 lens mount, so it is ready to use out of the box.