Digilin SGM-530 Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Lampu Kerja Digilin SGM-530. Digilin SGM-530 2 halaman. Led highbay

Digilin SGM-530 Panduan Instalasi
Sigma – LED Highbay
Installation Guide
Notes
Install in a dry sheltered position
Profile is not sealed. Do not install where water or high humidity may be present without further protection.
Installation should only be performed by a qualified professional
Install in accordance with all appropriate wiring standards
DALI is not SELV and needs to be wired accordingly
Never connect a LED fitting to a driver that is powered. Doing so may result in damage to the LED.
Always make sure the output voltage range and output current of the LED driver match the requirements of the LED fitting. Failure to do so may
result in damage both the driver and fitting.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Do not install under mechanical stress.
Allow for expansion due to changes in temperature.
Please be aware that while the system has a very long operational life, faults may still occur, and provision needs to be made for maintenance.
Always turn off power before working on fitting.
Specifications
M o d e l
Dimensions
(Nil Reflector)
Weight
M o d e l
Dimensions
(Nil Reflector)
Weight
Installation
Suspended
1.
Mount fitting to desired location. Ensure
method of mounting & all materials used are
of appropriate weight rating. Do not use the
power cable to support the weight of the
fitting.
digilin.com.au
+617 3899 1267
S G M - 5 3
S G M - 1 0 5
245W x 140H x 208D
425W x 140H x 208D
3.5
S G M - 2 6 5
S G M - 3 2 0
971W x 140H x 208D
607W x 140H x 417D
9.0
2.
Connect mains power to fitting. Where
applicable connect control signals.
S G M - 1 6 0
607W x 140H x 208D
4.2
5.4
S G M - 4 2 0
789W x 140H x 417D
11.0
15.0
S G M - 2 1 0
789W x 140H x 208D
7.2
S G M - 5 3 0
971W x 140H x 417D
18.0
3.
Power on
Document Rev: 1.0 - 25 November 2020
Product specifications are subject to change without notice
U n i t s
mm
kg
U n i t s
mm
kg
©2020 Digilin Technologies
Page 1 of 2