ABB SACE Emax 2 Manual Perkuatan - Halaman 8

Jelajahi secara online atau unduh pdf Manual Perkuatan untuk Alat Ukur ABB SACE Emax 2. ABB SACE Emax 2 10 halaman. With aeg me1257-me2007-me2507-me3207 plug-in air circuit-breakers
Juga untuk ABB SACE Emax 2: Manual (5 halaman), Manual (7 halaman), Manual (6 halaman), Manual (6 halaman), Manual (5 halaman), Manual (4 halaman), Manual (4 halaman), Manual (6 halaman), Manual (4 halaman), Manual (7 halaman), Manual (6 halaman), Panduan Pengguna (10 halaman), Manual (15 halaman), Manual (4 halaman), Manual (6 halaman), Manual (5 halaman), Manual (15 halaman), Manual (4 halaman), Manual (12 halaman), Petunjuk Pemasangan (20 halaman), Manual (18 halaman), Panduan Pemilik (20 halaman), Manual (16 halaman), Panduan Memulai Cepat (7 halaman), Pemasangan (8 halaman), Manual (11 halaman), Penggantian (16 halaman), Manual (14 halaman), Manual (13 halaman), Panduan Pengguna (14 halaman), Panduan Memulai Cepat (5 halaman), Panduan Pengoperasian Awal (8 halaman), Manual (4 halaman), Manual (9 halaman), Manual Perkuatan (16 halaman), Manual (11 halaman)

Ÿ Once the CiC adapter is fully pushed into the

switchgear cell Manually, unlock the extension

rails and remove them from cell. (ﬁg. 6)

Fig. 6

Ÿ Rack-in the CiC adapter into switchgear

using DB rack-in/out leverage tool.

(Legacy DB-Leverage tool)

as shown in (ﬁg. 7)

Ÿ Once the cradle is fully racked in extend

the locking bracket on LH and RH side of the

CiC adapter as shown in (ﬁg. 8) and lock it by

tightening screws.

Note: If any unusual resistance is detected that

could be abnormal interference between the CiC

adapter and the switchgear cell parts stop

immediately and retract the CiC adapter.

Examine what is causing the interference and

correct the situation.

•

Remove all the tools and equipment used

for the CiC adapter installation and clean oﬀ

any processing residues and metal scraps.

Optional Auxiliary (Secondary) Circuits Notes:

The installed auxiliary circuits have been wired in accordance with the supplied wiring diagrams which are

based on customer furnished information. Review the wiring diagrams for integration and compliance to the

switchgear circuitry.

Prior to energizing the auxiliary circuits, verify that the secondary contacts are properly engaged by

performing a continuity test on each installed circuit.

Review the "Putting into service" section of the Emax 2 installation, operation, and maintenance manual

1SDH001000R0002 for speciﬁc checks of the installed accessories.

Fig. 7

Fig. 8