Cisco 2950 - Catalyst Switch Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 19 halaman. Long-reach ethernet switches
Juga untuk Cisco 2950 - Catalyst Switch: Panduan Solusi (17 halaman), Buletin Produk (3 halaman), Buletin Dukungan Produk (5 halaman), Panduan Migrasi (25 halaman), Buletin Dukungan Produk (6 halaman), Panduan Memulai (29 halaman), Lembar data (20 halaman)

Halaman Cetak
Cisco 2950 - Catalyst Switch Manual
Cisco - Connecting a Terminal to the Console Port on Catalyst Switches
Not
2
Connected
TxD
3
GND
4
GND
5
RxD
6
Not
7
Connected
CTS
8

Connecting to a Terminal

Use the thin, flat RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter to connect the
console port to a terminal.
cable, and the RJ-45-to-DB-25 female DTE adapter.
Note: The RJ-45-to-DB-25 female DTE adapter is not supplied with the switch. You may order a kit
(part number ACS-DSBUASYN=) containing this adapter from Cisco.
Table A-2: Console Port Signaling and Cabling Using a DB-25 Adapter
Console
RJ-45-to-RJ-45
Port
Rollover Cable
(DTE)
RJ-45
Signal
Pin
RTS
1
Not
2
Connected
TxD
3
GND
4
GND
5
RxD
6
Not
7
Connected
CTS
8
http://www.cisco.com/warp/public/473/9.html (4 of 19) [9/4/2003 12:36:02 PM]
7
6
6
2
5
5
4
5
3
3
2
4
1
7
Table A-2
lists the pinouts for the console port, the RJ-45-to-RJ-45 rollover
RJ-45-to-DB-25
Terminal
Adapter
RJ-45
DB-25 Pin
Pin
8
5
7
6
6
3
5
7
4
7
3
2
2
20
1
4
DSR
RxD
GND
GND
TxD
DTR
RTS
Console
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS