Cisco 300 Series Panduan Memulai Cepat - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Cisco 300 Series. Cisco 300 Series 18 halaman. Managed switches
Juga untuk Cisco 300 Series: Lembar data (14 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (17 halaman)
Halaman Cetak
- 1. Quick Start Guide
- 2. Mounting the Cisco Switch
- 3. Rack-Mount Placement
- 4. Wall Mounting
- 5. Connecting Network Devices
- 6. Power over Ethernet (Poe) Considerations
- 7. Troubleshoot Your Connection
- 8. Front Panel Ports
- 9. Reset Button
- 10. Back Panel
- 11. Front Panel Leds
- 12. Returning the Device to the Factory Default Settings
- 13. Where to Go from here
Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.
Returning the Device to the Factory
5
Default Settings
To use the Reset button to reboot or reset the managed switch, do the
following:
• To reboot the managed switch, press the Reset button for less than 10
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the Reset button for more than
10 seconds.
14
Cisco 300 Series Managed Switches